Sunday, December 5, 2010

Been awhile....

It certainly has. The project has been on hold for a bit as life has gotten in the way but I know when I am ready to finish up she will be there waiting for me. Here is the latest video to keep you interested to see it to the end.


Wednesday, May 12, 2010

Lights Done

Got back in from traveling from the east coast and all I could think about when I was away was getting the lighting done. I had to alter the seat pan some more and I posted pictures of the fiberglass work in previous post. Had to trim out around the shock mounts to lower the pan a bit more and while I was at it I added a support post in the center of the pan to help distribute the excess weight of my fat A$$. Here are the pictures of the final setting of the pan, tail light and directionals. I believe its time to go to send it over to my buddy at Paint Trix. He does the best custom paint work I've ever seen. Hes done all my vehicles. Check him out at http://www.pianttrix.com/.


















Saturday, April 10, 2010

Brake and seat alterations

Got the brake light in today so now I get to mount it in the back of the seat pan and adjust the pan to fit the light better.  I did adjust it down some so there wasn't so much space between the tail of the pan and the rear fender.  Had to trim out some around the shock mounts....check out the pictures.











Tuesday, April 6, 2010

Now the fender....

Once the seat is on I can get a good idea where to place the fender so it accommodates the rear brake light and still serves its purpose..... keep the line of mud off my back.









Time to mount the seat.

After hours of debate with myself on how to get the seat on I figured out a way without having to drill new holes in the frame. I would use the existing holes for mounting the faux tank and two back holes, one is for the gas tank and the other is a blank. First I had to trim back the faux tank sides to get the seat pan to line up properly on the frame. Once the seat was lined up properly I could then decide where to drill the seat pan for the bolts. Because these bolts are now serving two purposes I used threaded metric rod and large fender washers to prop up the seat. I could then adjust the seat height by just moving turning the nut to the desired location. Pictures say it all. Oh yah the threaded rod is ground down so that they cant be felt with the seat pad in place.











The final result. I think I still may adjust that seat down farther in the back. We'll see when the rear brake light gets here this week.

Friday, March 26, 2010

Finally the parts come in! Well some....

Got the parts in to finish off putting in the headlight. Here are the pictures. Realized I didnt have all the parts but I was able to fabricate what I needed and I believe they will work better than the original part. I had received the top rubber ring from a shop in England, believe it or not they were the only ones that carried it. John Oldfield was the gentleman's name, very nice. He has a parts store online that carried old vintage stuff. New Old Stock type stuff. Well here are the pictures....













Couple set backs but moving forward. Looking good!

Well a couple minor setbacks but I'm not upset considering what I have done, there has to be a few adjustments. I noticed a very minor coolant leak... very minor when I ran the bike. After sitting I would get a couple drops from the water pump gasket. So I fixed that. Bike is still smoking on start up. My hope is this will rectify itself once I start really running it and not just here there random starts. Time will tell with that. I have decided to go with a single head light setup. I just didnt see the duals working with the way the bike looks so I bought a Ducati Monster 7 inch headlight and proceeded to make it work for the bike... looks nice so far, just waiting on more parts to finish putting that together fr good. Going with the single head light meant I had to go with a different headlight bracket setup. I decided to use the Goldwing Standard Fork Cover/Headlight bracket part. I liked the way it looked and I could customize it easily. I will be cutting the fiberglass seat to fit the GL1100 frame as it was made for the GL1000. I can get it to work. Pictures for all this are posted below,more will come as I complete each process. Also added handlebar risers as the straight drag bars were hitting the tank when trying to turn. They actually look good to as I had my reservations.