Here she is running, I love to hear her run. Its actually the 3rd start, I let her get reakky warm to this time. 2nd with the exhaust on. Made some adjustments and wanted to see if they made a difference. Getting a smokey right bank for some reason. When I first started it with the exhaust off I didn't get a bit of smoke. I actuallt ran it inside my garage and never got a whiff of anything. My guess is I am burning off some oil in the exhaust pipes. The previous motor it was on had broken the valves on the right head so I guess there was some oil in the pipes. Let her run and we will see..... She starts so easy. I cant wait to finally get her through some gears.
This is a step by step blow of a rebuild of a dead Wing I got a few months back. Bear with me as I experiment with the site and make it a informative as can. If you have any suggestions on what I am doing please feel free to add your comments or contact me directly.
Monday, February 22, 2010
Friday, February 19, 2010
Hows this for an oil flter conversion?
Got a oil filter conversion plate for the Goldwing. It allows me to use the off the shelf oil filters. Makes for a real easy oil change. Polished it out and threw a filter on it. I'll run it for about 2 hours total time and change the oil out to make sure its clean in the engine. Then the good stuff.


Exhaust, exhaust... what do I do?
Well I got her out the other day for the first start since the rebuild/restoration/customnization. Filled her with oil and antifreeze. Gave a few dead cranks to get the oil moving, a shot of starting fluid and BAM running like a champ. I have started her a few times since then just to hear her pur and its an easy task.... starts right up. Puts my mind at ease to because it further gives credibility to my carb rebuilding skills. NOW THE EXHAUST! Well being out of work has left me in a little predicament. I cant fabricate the exhaust I wanted to so I am left with using the stock exhaust for the time being. I will modify that. Not sure what I will do as the chrome is pretty well hammered but the overall condition of the exhaust is good... maybe black it out. Pictures below....




Friday, February 12, 2010
She's getting there....
Well it was 47 degrees out to day and some what sunny so I figured I wheel out the beast. Still afew little things to do and I will crank her up this weekend. Waiting on the painted parts, the exhaust has to be fabricated, the dual lights have to mounted once I create a bracket for it (It will look cool) then signal and tail lights. Waiting till the last for those as I have to cut down the rear fender ALOT and I cant d that till I get the seat back. Seat is custom so I dont want to pre cut anything and be wrong. Well here she is.....

Wednesday, February 3, 2010
Cutting down the Clutch and Throttlecables.
After putting on the drag bars I didnt take into consideration that my cables would be longer, like 6 inches to long because the stock bars sat that much higher. So it was off to my local cycle shop to have the cables trimmed back. When I got there I talked to the mechanic and h said as long as I had a dremel with a cutting wheel and a soldering iron I could easily do it myself. I dont mind a challenge so 6 bucks in parts and a couple hours later he was right. One of the easiest tasks I have done working on this beast.


Monday, February 1, 2010
Houston we have ignition.... well we have juice but no fire yet.
Had a small problem with the electrics the other day... no juice. Traced it all the way back to the solenoid next to the battery. Replaced it and bingo we have power. Engine turns and everything. I still need to get the carbs checked over before I mount them in, once that happens I can fire her up. I cant wait, one thing at a time. Mounted up the kick stand and rear brake assembly, all cleaned up and buffed out. The pictures dont do it justice as the pictures I take tend to produce more dust on the bike than actually exists it seems. Also went to installed the cable for the clutch and it seems ALL my cables need to be trimmed back about 3 or 4 inches because of the drag bars I put on are alot shorter. I will do those myself tomorrow. Exciting day as I actually took the bike off the stand and sat it on its on kick stand.... we are almost there.



Subscribe to:
Posts (Atom)