Sunday, December 5, 2010

Been awhile....

It certainly has. The project has been on hold for a bit as life has gotten in the way but I know when I am ready to finish up she will be there waiting for me. Here is the latest video to keep you interested to see it to the end.


Wednesday, May 12, 2010

Lights Done

Got back in from traveling from the east coast and all I could think about when I was away was getting the lighting done. I had to alter the seat pan some more and I posted pictures of the fiberglass work in previous post. Had to trim out around the shock mounts to lower the pan a bit more and while I was at it I added a support post in the center of the pan to help distribute the excess weight of my fat A$$. Here are the pictures of the final setting of the pan, tail light and directionals. I believe its time to go to send it over to my buddy at Paint Trix. He does the best custom paint work I've ever seen. Hes done all my vehicles. Check him out at http://www.pianttrix.com/.


















Saturday, April 10, 2010

Brake and seat alterations

Got the brake light in today so now I get to mount it in the back of the seat pan and adjust the pan to fit the light better.  I did adjust it down some so there wasn't so much space between the tail of the pan and the rear fender.  Had to trim out some around the shock mounts....check out the pictures.











Tuesday, April 6, 2010

Now the fender....

Once the seat is on I can get a good idea where to place the fender so it accommodates the rear brake light and still serves its purpose..... keep the line of mud off my back.









Time to mount the seat.

After hours of debate with myself on how to get the seat on I figured out a way without having to drill new holes in the frame. I would use the existing holes for mounting the faux tank and two back holes, one is for the gas tank and the other is a blank. First I had to trim back the faux tank sides to get the seat pan to line up properly on the frame. Once the seat was lined up properly I could then decide where to drill the seat pan for the bolts. Because these bolts are now serving two purposes I used threaded metric rod and large fender washers to prop up the seat. I could then adjust the seat height by just moving turning the nut to the desired location. Pictures say it all. Oh yah the threaded rod is ground down so that they cant be felt with the seat pad in place.











The final result. I think I still may adjust that seat down farther in the back. We'll see when the rear brake light gets here this week.

Friday, March 26, 2010

Finally the parts come in! Well some....

Got the parts in to finish off putting in the headlight. Here are the pictures. Realized I didnt have all the parts but I was able to fabricate what I needed and I believe they will work better than the original part. I had received the top rubber ring from a shop in England, believe it or not they were the only ones that carried it. John Oldfield was the gentleman's name, very nice. He has a parts store online that carried old vintage stuff. New Old Stock type stuff. Well here are the pictures....













Couple set backs but moving forward. Looking good!

Well a couple minor setbacks but I'm not upset considering what I have done, there has to be a few adjustments. I noticed a very minor coolant leak... very minor when I ran the bike. After sitting I would get a couple drops from the water pump gasket. So I fixed that. Bike is still smoking on start up. My hope is this will rectify itself once I start really running it and not just here there random starts. Time will tell with that. I have decided to go with a single head light setup. I just didnt see the duals working with the way the bike looks so I bought a Ducati Monster 7 inch headlight and proceeded to make it work for the bike... looks nice so far, just waiting on more parts to finish putting that together fr good. Going with the single head light meant I had to go with a different headlight bracket setup. I decided to use the Goldwing Standard Fork Cover/Headlight bracket part. I liked the way it looked and I could customize it easily. I will be cutting the fiberglass seat to fit the GL1100 frame as it was made for the GL1000. I can get it to work. Pictures for all this are posted below,more will come as I complete each process. Also added handlebar risers as the straight drag bars were hitting the tank when trying to turn. They actually look good to as I had my reservations.











Friday, March 5, 2010

Just a quick update

Though I am not finished with he painted parts I got the tank cover and seat back so I could place the mounting brackets for the seat as well as get an idea of what to do about a fender. Here's the picture.



Monday, February 22, 2010

She's running.... video clip

Here she is running, I love to hear her run. Its actually the 3rd start, I let her get reakky warm to this time. 2nd with the exhaust on. Made some adjustments and wanted to see if they made a difference. Getting a smokey right bank for some reason. When I first started it with the exhaust off I didn't get a bit of smoke. I actuallt ran it inside my garage and never got a whiff of anything. My guess is I am burning off some oil in the exhaust pipes. The previous motor it was on had broken the valves on the right head so I guess there was some oil in the pipes. Let her run and we will see..... She starts so easy. I cant wait to finally get her through some gears.


Friday, February 19, 2010

Hows this for an oil flter conversion?

Got a oil filter conversion plate for the Goldwing. It allows me to use the off the shelf oil filters. Makes for a real easy oil change. Polished it out and threw a filter on it. I'll run it for about 2 hours total time and change the oil out to make sure its clean in the engine. Then the good stuff.





Exhaust, exhaust... what do I do?

Well I got her out the other day for the first start since the rebuild/restoration/customnization. Filled her with oil and antifreeze. Gave a few dead cranks to get the oil moving, a shot of starting fluid and BAM running like a champ. I have started her a few times since then just to hear her pur and its an easy task.... starts right up. Puts my mind at ease to because it further gives credibility to my carb rebuilding skills. NOW THE EXHAUST! Well being out of work has left me in a little predicament. I cant fabricate the exhaust I wanted to so I am left with using the stock exhaust for the time being. I will modify that. Not sure what I will do as the chrome is pretty well hammered but the overall condition of the exhaust is good... maybe black it out. Pictures below....









Friday, February 12, 2010

She's getting there....

Well it was 47 degrees out to day and some what sunny so I figured I wheel out the beast. Still afew little things to do and I will crank her up this weekend. Waiting on the painted parts, the exhaust has to be fabricated, the dual lights have to mounted once I create a bracket for it (It will look cool) then signal and tail lights. Waiting till the last for those as I have to cut down the rear fender ALOT and I cant d that till I get the seat back. Seat is custom so I dont want to pre cut anything and be wrong. Well here she is.....



Wednesday, February 3, 2010

Cutting down the Clutch and Throttlecables.

After putting on the drag bars I didnt take into consideration that my cables would be longer, like 6 inches to long because the stock bars sat that much higher. So it was off to my local cycle shop to have the cables trimmed back. When I got there I talked to the mechanic and h said as long as I had a dremel with a cutting wheel and a soldering iron I could easily do it myself. I dont mind a challenge so 6 bucks in parts and a couple hours later he was right. One of the easiest tasks I have done working on this beast.