Friday, January 16, 2009

Carb rebuild process






I wish I took before pictures but this is how it coming. I soaked everything in Gunk Carb and Parts Cleaner. Then scrubbed everything down with soap and water then carb cleaner. Once that was done I started the buffing process. Coming out nice so far. You can see the difference already between the two carb bodies.

Tuesday, January 13, 2009

I'll have more for you guys later but I have hit a stumbling block on the swingarm. Upon assembling the swingarm I had a small problem. The swingarm bolts would not thread all the way through the frame and started messing up the threads, just on the right side, the left side threaded. I think its the powder coating but I can't see anything. So rather than mess up the bolts I ordered the tap to clean out the threads. Its a 30mm x 1.5mm if anyone is interested, and it is expensive. Killed me to do it but I want this right. Once I get the threads cleaned up and mounted will have more to post. In the mean time I have started the complete rebuild of the carbs. Once those are done they will be polished and perfect. I am using Randakks master rebuild kit to do it. After much research his kit is by far the best on the market. I bought the book to.

Later and Happy New Year!