This is a step by step blow of a rebuild of a dead Wing I got a few months back. Bear with me as I experiment with the site and make it a informative as can. If you have any suggestions on what I am doing please feel free to add your comments or contact me directly.
Monday, February 1, 2010
Houston we have ignition.... well we have juice but no fire yet.
Had a small problem with the electrics the other day... no juice. Traced it all the way back to the solenoid next to the battery. Replaced it and bingo we have power. Engine turns and everything. I still need to get the carbs checked over before I mount them in, once that happens I can fire her up. I cant wait, one thing at a time. Mounted up the kick stand and rear brake assembly, all cleaned up and buffed out. The pictures dont do it justice as the pictures I take tend to produce more dust on the bike than actually exists it seems. Also went to installed the cable for the clutch and it seems ALL my cables need to be trimmed back about 3 or 4 inches because of the drag bars I put on are alot shorter. I will do those myself tomorrow. Exciting day as I actually took the bike off the stand and sat it on its on kick stand.... we are almost there.



Friday, January 29, 2010
The electrics gets some time and the Instrument Cluster goes on..... Turn the key and nothing.
Well its amazing how much time passes when your busy. My poor baby has been sitting patiently waiting for me to spend some quality time with her. Its been hard cash being tight and my attentions being drawn elsewhere, but she is here and patiently waits. During one of my many passes through my end of the garage to take the dogs out to do there duty the guilt of the Goldwing sitting there finally got ahold of me. I got the dogs in and pulled the cover off the bike and started working away and told myself nothing gets in the way today. This is what I did.....



Shock work to!
Oh and I almost forgot! I got my stainless steel bushing in for the rear shocks. I needed to have them machined to fit the shocks from a 2009 Honda VTX. The shocks were a bit wider than the stock 1980 Goldwing shocks so I needed to bump them put about 3/8ths of an inch on both sides to clear the frame. The shock studs were wide enough to accommodate the adjustment. The bushings went on the inside of the shock mount, nylon spacers went on the opposite side for a snug squeak free fit. Worked out well. Bolts and stuff still need the polish but the first run pre-fit went well. Check out the pictures.



Well its amazing how much time passes when your busy. My poor baby has been sitting patiently waiting for me to spend some quality time with her. Its been hard cash being tight and my attentions being drawn elsewhere, but she is here and patiently waits. During one of my many passes through my end of the garage to take the dogs out to do there duty the guilt of the Goldwing sitting there finally got ahold of me. I got the dogs in and pulled the cover off the bike and started working away and told myself nothing gets in the way today. This is what I did.....
Shock work to!
Oh and I almost forgot! I got my stainless steel bushing in for the rear shocks. I needed to have them machined to fit the shocks from a 2009 Honda VTX. The shocks were a bit wider than the stock 1980 Goldwing shocks so I needed to bump them put about 3/8ths of an inch on both sides to clear the frame. The shock studs were wide enough to accommodate the adjustment. The bushings went on the inside of the shock mount, nylon spacers went on the opposite side for a snug squeak free fit. Worked out well. Bolts and stuff still need the polish but the first run pre-fit went well. Check out the pictures.
Tuesday, September 8, 2009
Tank in, Wiring harness on, Brake lines on.... its coming together
Well I finally got a Labor Day run at the project and had a productive day. I got the new/used coils in on Friday so I thought it would be a good time to get the harness in. I started my scrubbing the harness down and taking the components off the mounting bracket. The bracket was painted and mounted on the bike, thusly the components went back on. Once I got the harness in and mounted I proceeded to cleanup the coils and the mounting brackets.... thats going to take a bit as all the mounting screws are frozen (They will go in later). Disasembled the rear wheel one more time to get the gas tank in. Nice powder coated tank! Then proceeded to cleanup the brake lines and reinstalled those. Then the battery box and battery. Its getting there folks. I'll get the coils done this week and mounted in.... it will all look new. Enjoy the pictures.
Wednesday, August 5, 2009
Finally the radiator goes in.
Man I haven't had much time to put into this lately so I woke up toda an said the hell with work. I am doing something on my Goldwing. So it looks like the radiator made it in and I started to finish up the work on the calipers. I should have those in this weekend as it will be raining out. Here are some pics..... I'm getting excited. The tank and all tin parts will be finished by the end of next week so things should start pulling together fast.
Sunday, June 7, 2009
Got the new wheels!
I found these rims on Ebay at a great price. So once I got them home it was time for the degreasing. You can see my grandson is becoming a garage rat, he loves to help out especially when there is water involved. I was fortunate with these rims as they were in pretty good shape so I all I really needed to do was get out the ol' Dremel and polish up the lip and spokes back to former glory. Once that was done I had to mask out all the shiny spokes and lips (what a pain!) but it was worth it when you see the final product. I have shots at different intervals and finished on the bike. I really wanted spokes but it would have been to hard to get them on this bike and EXPENSIVE.
Wednesday, May 13, 2009




Well just got the new shocks off Ebay and what a steal. Brand new off a Honda VTX 1800S. Right from a trike shop that had the new bike in for a conversion. In the pictures you'll see I couldn't wait to slide them on. They look great! However there will be have to be some slight modifications to get thm to fit properly. Everything fits but I have to slide the top of the shock out about 1/2 inch on the top mounting stud to keep the top of the shock from htting the frame (easy). There is plenty of stud to mount it so all I need to do is make a spacer and its done. I'll show more pictures on it when I mount them for good, everything else is a go. What else you see is a cafe seat I also found on Ebay. I looked everywhere for someone who made thee seats for the Goldwings and I couldn't find anyone then this one popped up so I grabbed it. The maker is Hotwing Glass out of Florida. The owners name is Dave Burgess, had a long conversation with him and I sent him pictures of the seat sitting on the bike. The seat was originally made for a GL1000 not an 1100 so I am hoping with some ingenuity I can get this to work. I sent him the pictures so he could see possibly where the alterations need to take place as I am sure there is a big market for the guys building the 1100's and 1200's. Dave is a great guy! Thanks for your time Dave. Well without further adue here are the new pics....
Monday, April 20, 2009
Swingarm ON!
Okay the swingarm is on! After cleaning and powdercoating it looks brand new. I still have the other swingarm that I cut the drive tube on. I will be working on that one to try to fit a larger tire on but for now and to keep the project moving I installed a stock swingarm off an 83 Goldwing. It actually has more tire clearance than the 80 version. Things are looking good. All I have left to do is buff out the bolts and the caps on the differential.... more pics to come. I also enclosed the pictures of the powder coated rear fender. I will be cutting that back once I figure out the cowling I put on the rear. The carb tops were done to. Those look great. I couldn't buff them out as they were very badly pitted.... powdercoating turned out to be a great option.



Subscribe to:
Posts (Atom)