Monday, April 20, 2009

Swingarm ON!

Okay the swingarm is on! After cleaning and powdercoating it looks brand new. I still have the other swingarm that I cut the drive tube on. I will be working on that one to try to fit a larger tire on but for now and to keep the project moving I installed a stock swingarm off an 83 Goldwing. It actually has more tire clearance than the 80 version. Things are looking good. All I have left to do is buff out the bolts and the caps on the differential.... more pics to come. I also enclosed the pictures of the powder coated rear fender. I will be cutting that back once I figure out the cowling I put on the rear. The carb tops were done to. Those look great. I couldn't buff them out as they were very badly pitted.... powdercoating turned out to be a great option.



Friday, April 10, 2009

Updates! Swingarm and differential next.



Okay so we got the engine unseized and it really wasn't that bad. Once I pulled the heads off I was able to free the pistons up easily. Once I got the gasket kit I cleaned everything up and put it back together. Synced and timed everything and cleaned it up. Here is a picture of the differential all cleaned and painted. I am just waiting for the swingarm and radiator parts to come back from the powder coating shop. I also had the tops of the carbs powder coated gloss black as buffing them did no good, can't wait to see them.

Saturday, February 28, 2009

Seized engine

After months of work getting the bike to the point where I could try to run it. I ran into a major road block. On trying to time the bike I noticed the engine would not turn at all. I had never tried it before I started any work as it was a low mileage motor and I was told it had been turned. The gentleman was an honorable person and I believed him... I still do. I believe the problem was created when I clean the motor, though I had taken ever precaution to seal all entry to the cylinders I believe I had a small leak causing rust to build up in the cylinders. Below is the pictures from the left bank (which is relatively clean) and the right (this is where the damage occured). I had spent a good week and a half soaking these cylinders down with Marvel Mystery Oil but could never get them to budge. Here they are.


Sunday, February 1, 2009

Bottom side showing buffed out bowl.

This represents to this point about 3o hours of work and tons of dremel polishing bits.

Old and new. The carb on the right is what the left one looked like when I started. Its still not done yet but its almost there.

Friday, January 16, 2009

Carb rebuild process






I wish I took before pictures but this is how it coming. I soaked everything in Gunk Carb and Parts Cleaner. Then scrubbed everything down with soap and water then carb cleaner. Once that was done I started the buffing process. Coming out nice so far. You can see the difference already between the two carb bodies.