Friday, January 16, 2009

Carb rebuild process






I wish I took before pictures but this is how it coming. I soaked everything in Gunk Carb and Parts Cleaner. Then scrubbed everything down with soap and water then carb cleaner. Once that was done I started the buffing process. Coming out nice so far. You can see the difference already between the two carb bodies.

Tuesday, January 13, 2009

I'll have more for you guys later but I have hit a stumbling block on the swingarm. Upon assembling the swingarm I had a small problem. The swingarm bolts would not thread all the way through the frame and started messing up the threads, just on the right side, the left side threaded. I think its the powder coating but I can't see anything. So rather than mess up the bolts I ordered the tap to clean out the threads. Its a 30mm x 1.5mm if anyone is interested, and it is expensive. Killed me to do it but I want this right. Once I get the threads cleaned up and mounted will have more to post. In the mean time I have started the complete rebuild of the carbs. Once those are done they will be polished and perfect. I am using Randakks master rebuild kit to do it. After much research his kit is by far the best on the market. I bought the book to.

Later and Happy New Year!

Thursday, November 20, 2008



These pictures show the swingarm mounted on the frame and the drive shaft installed.  Looks like there is a ton of room.  I think I can gain a total of 1.5 inches of room for a larger tire.  I will test it farther by moving the swingarm in different positions to see where it could possibly rub then I will have the new patch welded on the swingarm.  Once thats done its off to the powder coating shop for the finish, install the new bearing then on the frame.


Here you see I have cut away the factory welded indentation to expose the drive tube. Notice how thick the piece was.  The reason for the thickness os the overlap of materials in that corner of the swingarm.  Just cutting away the top layer would not hinder the performance/strength of the swingarm in anyway and would allow for a minor upgrade to larger tire without having to go through the extreme process I am now.  Something to think about if you want to do a quick tire upgrade.

Swingarm modification


In these photos I have started the modifications for the swingarm to accomodate a bigger tire.

Tuesday, November 18, 2008

Swingarm pictures coming next!

Thursday, November 13, 2008



Here are a few more pictures of the engine installed.
Posted by Picasa