These pictures show the swingarm mounted on the frame and the drive shaft installed. Looks like there is a ton of room. I think I can gain a total of 1.5 inches of room for a larger tire. I will test it farther by moving the swingarm in different positions to see where it could possibly rub then I will have the new patch welded on the swingarm. Once thats done its off to the powder coating shop for the finish, install the new bearing then on the frame.
This is a step by step blow of a rebuild of a dead Wing I got a few months back. Bear with me as I experiment with the site and make it a informative as can. If you have any suggestions on what I am doing please feel free to add your comments or contact me directly.
Thursday, November 20, 2008
Here you see I have cut away the factory welded indentation to expose the drive tube. Notice how thick the piece was. The reason for the thickness os the overlap of materials in that corner of the swingarm. Just cutting away the top layer would not hinder the performance/strength of the swingarm in anyway and would allow for a minor upgrade to larger tire without having to go through the extreme process I am now. Something to think about if you want to do a quick tire upgrade.
Tuesday, November 18, 2008
Thursday, November 13, 2008
Here we have the engine being mounted in the frame. Before this was done the clutch and timing belts were replaced as well as all the case bolts replaced with stainless allen head bolts. I'll show a close up of those in the next picture. They really dress up the engine next to the buffed out timin and valve covers.
Here is the engie now primed and painted. I kept it the original color and used Duplicolor engine Primer and paint. I put the old valve covers on as they were trashed from sitting out in the weather for so long but they served to make great paint covers. It was much easier than taping. On the front view I cleaned and buffed out the original timing belt covers as they were protected from weather, rocks and bugs under the full fairing. They came out nice. You can see the buffer out valve covers later in the engine installations pictures.
Subscribe to:
Posts (Atom)
