This is a step by step blow of a rebuild of a dead Wing I got a few months back. Bear with me as I experiment with the site and make it a informative as can. If you have any suggestions on what I am doing please feel free to add your comments or contact me directly.
Tuesday, April 6, 2010
Now the fender....
Once the seat is on I can get a good idea where to place the fender so it accommodates the rear brake light and still serves its purpose..... keep the line of mud off my back.




Time to mount the seat.
After hours of debate with myself on how to get the seat on I figured out a way without having to drill new holes in the frame. I would use the existing holes for mounting the faux tank and two back holes, one is for the gas tank and the other is a blank. First I had to trim back the faux tank sides to get the seat pan to line up properly on the frame. Once the seat was lined up properly I could then decide where to drill the seat pan for the bolts. Because these bolts are now serving two purposes I used threaded metric rod and large fender washers to prop up the seat. I could then adjust the seat height by just moving turning the nut to the desired location. Pictures say it all. Oh yah the threaded rod is ground down so that they cant be felt with the seat pad in place.





The final result. I think I still may adjust that seat down farther in the back. We'll see when the rear brake light gets here this week.
The final result. I think I still may adjust that seat down farther in the back. We'll see when the rear brake light gets here this week.
Friday, March 26, 2010
Finally the parts come in! Well some....
Got the parts in to finish off putting in the headlight. Here are the pictures. Realized I didnt have all the parts but I was able to fabricate what I needed and I believe they will work better than the original part. I had received the top rubber ring from a shop in England, believe it or not they were the only ones that carried it. John Oldfield was the gentleman's name, very nice. He has a parts store online that carried old vintage stuff. New Old Stock type stuff. Well here are the pictures....






Couple set backs but moving forward. Looking good!
Well a couple minor setbacks but I'm not upset considering what I have done, there has to be a few adjustments. I noticed a very minor coolant leak... very minor when I ran the bike. After sitting I would get a couple drops from the water pump gasket. So I fixed that. Bike is still smoking on start up. My hope is this will rectify itself once I start really running it and not just here there random starts. Time will tell with that. I have decided to go with a single head light setup. I just didnt see the duals working with the way the bike looks so I bought a Ducati Monster 7 inch headlight and proceeded to make it work for the bike... looks nice so far, just waiting on more parts to finish putting that together fr good. Going with the single head light meant I had to go with a different headlight bracket setup. I decided to use the Goldwing Standard Fork Cover/Headlight bracket part. I liked the way it looked and I could customize it easily. I will be cutting the fiberglass seat to fit the GL1100 frame as it was made for the GL1000. I can get it to work. Pictures for all this are posted below,more will come as I complete each process. Also added handlebar risers as the straight drag bars were hitting the tank when trying to turn. They actually look good to as I had my reservations.





Friday, March 5, 2010
Just a quick update
Monday, February 22, 2010
She's running.... video clip
Here she is running, I love to hear her run. Its actually the 3rd start, I let her get reakky warm to this time. 2nd with the exhaust on. Made some adjustments and wanted to see if they made a difference. Getting a smokey right bank for some reason. When I first started it with the exhaust off I didn't get a bit of smoke. I actuallt ran it inside my garage and never got a whiff of anything. My guess is I am burning off some oil in the exhaust pipes. The previous motor it was on had broken the valves on the right head so I guess there was some oil in the pipes. Let her run and we will see..... She starts so easy. I cant wait to finally get her through some gears.
Friday, February 19, 2010
Hows this for an oil flter conversion?
Got a oil filter conversion plate for the Goldwing. It allows me to use the off the shelf oil filters. Makes for a real easy oil change. Polished it out and threw a filter on it. I'll run it for about 2 hours total time and change the oil out to make sure its clean in the engine. Then the good stuff.


Subscribe to:
Posts (Atom)