Friday, April 10, 2009

Updates! Swingarm and differential next.



Okay so we got the engine unseized and it really wasn't that bad. Once I pulled the heads off I was able to free the pistons up easily. Once I got the gasket kit I cleaned everything up and put it back together. Synced and timed everything and cleaned it up. Here is a picture of the differential all cleaned and painted. I am just waiting for the swingarm and radiator parts to come back from the powder coating shop. I also had the tops of the carbs powder coated gloss black as buffing them did no good, can't wait to see them.

Saturday, February 28, 2009

Seized engine

After months of work getting the bike to the point where I could try to run it. I ran into a major road block. On trying to time the bike I noticed the engine would not turn at all. I had never tried it before I started any work as it was a low mileage motor and I was told it had been turned. The gentleman was an honorable person and I believed him... I still do. I believe the problem was created when I clean the motor, though I had taken ever precaution to seal all entry to the cylinders I believe I had a small leak causing rust to build up in the cylinders. Below is the pictures from the left bank (which is relatively clean) and the right (this is where the damage occured). I had spent a good week and a half soaking these cylinders down with Marvel Mystery Oil but could never get them to budge. Here they are.


Sunday, February 1, 2009

Bottom side showing buffed out bowl.

This represents to this point about 3o hours of work and tons of dremel polishing bits.

Old and new. The carb on the right is what the left one looked like when I started. Its still not done yet but its almost there.

Friday, January 16, 2009

Carb rebuild process






I wish I took before pictures but this is how it coming. I soaked everything in Gunk Carb and Parts Cleaner. Then scrubbed everything down with soap and water then carb cleaner. Once that was done I started the buffing process. Coming out nice so far. You can see the difference already between the two carb bodies.

Tuesday, January 13, 2009

I'll have more for you guys later but I have hit a stumbling block on the swingarm. Upon assembling the swingarm I had a small problem. The swingarm bolts would not thread all the way through the frame and started messing up the threads, just on the right side, the left side threaded. I think its the powder coating but I can't see anything. So rather than mess up the bolts I ordered the tap to clean out the threads. Its a 30mm x 1.5mm if anyone is interested, and it is expensive. Killed me to do it but I want this right. Once I get the threads cleaned up and mounted will have more to post. In the mean time I have started the complete rebuild of the carbs. Once those are done they will be polished and perfect. I am using Randakks master rebuild kit to do it. After much research his kit is by far the best on the market. I bought the book to.

Later and Happy New Year!