This is a step by step blow of a rebuild of a dead Wing I got a few months back. Bear with me as I experiment with the site and make it a informative as can. If you have any suggestions on what I am doing please feel free to add your comments or contact me directly.
Tuesday, November 18, 2008
Thursday, November 13, 2008
Here we have the engine being mounted in the frame. Before this was done the clutch and timing belts were replaced as well as all the case bolts replaced with stainless allen head bolts. I'll show a close up of those in the next picture. They really dress up the engine next to the buffed out timin and valve covers.
Here is the engie now primed and painted. I kept it the original color and used Duplicolor engine Primer and paint. I put the old valve covers on as they were trashed from sitting out in the weather for so long but they served to make great paint covers. It was much easier than taping. On the front view I cleaned and buffed out the original timing belt covers as they were protected from weather, rocks and bugs under the full fairing. They came out nice. You can see the buffer out valve covers later in the engine installations pictures.
Here is the newer engine. The original engine was toast when the valves broke and embedded themselves into the pistons. This engine has half the miles and it looked great. My son found this sitting in the basement of some guys house across the country. Here I am getting ready to start the cleaning process.
I had the gas tank powder coated also even though I was advised against it. The problem as told to me was when the tank go into the furnace after the powder coating is applied the goose necks usually have a lead solder attaching them to the tanks them selves and they usually can't take the heat and melt. In my case the goose neck was welded not soldered hence it can take the heat. I used the bench buffer to restore the gas cap and pickup.
Subscribe to:
Posts (Atom)
